油气藏评价与开发 >
2020 , Vol. 10 >Issue 1: 102 - 107
DOI: https://doi.org/10.13809/j.cnki.cn32-1825/te.2020.01.016
基于FEMM的径向井压裂裂缝扩展模拟研究
收稿日期: 2019-08-01
网络出版日期: 2020-02-04
基金资助
国家自然科学基金“页岩气开采水力压裂过程中裂缝网络形成机理及模拟分析方法”(41602296)
Research on fracture propagation of radial well fracturing based on finite element-meshfree method
Received date: 2019-08-01
Online published: 2020-02-04
径向井可用于引导水力压裂裂缝定向扩展,达到沟通非常规储层中的天然裂隙或溶洞,提高油气资源采收率的目的。径向井压裂技术已经在低渗透、浅埋藏油气田中得到了初步的应用和发展,但其机理仍不明确。因此,介绍了FEMM（Finite Element-Meshfree Method）的基本原理,并基于FEMM和现场数据建立了不同布井角度的径向井水力压裂模型,研究了不同方位角对径向井压裂裂缝扩展的影响规律。结果表明：利用FEMM验证了径向井对水力裂缝的扩展有一定的引导作用;水力裂缝首先沿着径向井方向扩展,扩展一段距离后沿着最大水平主应力方向扩展;径向井与最大水平主应力的夹角越大,径向井引导水力裂缝扩展的距离越短,径向井对裂缝的引导作用越小。研究成果对径向井压裂技术的应用具有一定的意义。
张耀峰 , 邵祖亮 , 王涛 , 伯音 . 基于FEMM的径向井压裂裂缝扩展模拟研究[J]. 油气藏评价与开发, 2020 , 10(1) : 102 -107 . DOI: 10.13809/j.cnki.cn32-1825/te.2020.01.016
Radial wells can be used to guide the propagation of hydraulic fractures in order to connect the natural fractures or caves in unconventional reservoirs and improve the recovery of oil and gas resources. Fracturing technology of radial wells has been preliminarily applied and developed in low permeability and shallow reservoirs, but its mechanism is still not very clear. Therefore, the basic principle of FEMM（Finite Element-Meshfree Method） is introduced. Besides, based on the FEMM and the field data, the radial well fracturing model with different well angles is established, and the effect of different azimuth angles on fracture propagation of radial well fracturing is studied. The results show that by using FEMM, it can be verified that radial wells play a guiding role in hydraulic fracturing. In addition, the hydraulic fracture firstly propagates along the direction of radial wells. After extending a certain distance, it turns to the direction of maximum horizontal stress. The bigger the angle between the radial wells and the horizontal maximum principal stress, and the shorter the length of fracture extending along the radial wells, the weaker the guiding ability of radial wells will be. The research results contribute to the application of radial well fracturing technology.
Key words： radial well; hydraulic fracturing; FEMM; orientated propagation; fracture path
| [1] | 吴信波, 王谦, 张俊 . 彬长矿区煤层气井水力压裂效果影响因素分析[J]. 非常规油气, 2017,4(6):100-104. |
| [1] | WU X B, WANG Q, ZHANG J . Analysis on influencing factors of hydraulic fracturing effect of coalbed methane wells in Binchang[J]. Unconventional Oil and Gas, 2017,4(6):100-104. |
| [2] | 张守仁, 胡彦林, 李贵川 , 等. 煤层气短水平段径向钻井压裂技术及应用[J]. 煤炭科学技术, 2016,44(5):50-53. |
| [2] | ZHANG S R, HU Y L, LI G C , et al. Short horizontal sectional radial drilling and fracturing technology of coalbed methane and application[J]. Coal Science and Technology, 2016,44(5):50-53. |
| [3] | 郝春生, 季长江 . 基于径向井技术的煤储层高效增透工艺研究[J]. 煤炭科学技术, 2016,44(5):39-42. |
| [3] | HAO C S, JI C J . Study on high efficient permeability improved technique of coal reservoir based on radial well technology[J]. Coal Science and Technology, 2016,44(5):39-42. |
| [4] | 马开良, 吴福才, 杨永印 , 等. 径向井技术在韦5井的应用[J]. 钻采工艺, 2005,28(5):17-20. |
| [4] | MA K L, WU F C, YANG Y Y , et al. Application of radial horizontal drilling technology in W5 well[J]. Drilling and Production Technology, 2005,28(5):17-20. |
| [5] | 钱国全, 储明来, 刘子龙 , 等. 水力喷射径向钻孔技术在江苏油田的应用研究[J]. 复杂油气藏, 2012,5(4):62-64. |
| [5] | QIAN G Q, CHU M L, LIU Z L , et al. Research of the application of hydraulic jet radial drilling technique in Jiangsu Oilfield[J]. Complex Hydrocarbon Reservoirs, 2012,5(4):62-64. |
| [6] | 党文辉, 马宏伟, 陈建林 , 等. 套管内钻孔深穿透径向井技术[J]. 石油钻采工艺, 2013,35(1):45-47. |
| [6] | DANG W H, MA H W, CHEN J L , et al. Research on deep penetration of radial well hole-drilling in casing[J]. Oil Drilling and Production Technology, 2013,35(1):45-47. |
| [7] | 田雨, 曲占庆, 郭天魁 , 等. 径向井引导水力压裂裂缝定向扩展技术[J]. 科学技术与工程, 2017,17(20):154-159. |
| [7] | TIAN Y, QU Z Q, GUO T K , et al. Theoretical research on radial wells orientating hydraulically created fracture directional extended[J]. Science Technology and Engineering, 2017,17(20):154-159. |
| [8] | 李小龙, 李建雄, 王涛 , 等. 基于数值模拟的径向井压裂裂缝形态[J]. 大庆石油地质与开发, 2018,37(3):90-95. |
| [8] | LI X L, LI J X, WANG T , et al. Crack morphology of the radial well fracturing based on the numerical simulation[J]. Petroleum Geology and Oilfield Development in Daqing, 2018,37(3):90-95. |
| [9] | 刘海龙, 张磊, 谢涛 , 等. 定向射孔水力压裂起裂压力研究[J]. 石油机械, 2018,46(9):63-68. |
| [9] | LIU H L, ZHANG L, XIE T , et al. Study on hydraulic fracturing initiation pressure of oriented perforating[J]. China Petroleum Machinery, 2018,46(9):63-68. |
| [10] | 曲占庆, 李小龙, 李建雄 , 等. 基于扩展有限元法的多径向井压裂裂缝形态[J]. 中国石油大学学报(自然科学版), 2018,42(1):73-81. |
| [10] | QU Z Q, LI X L, LI J X , et al. Crack morphology of multiple radial well fracturing based on extended finite element method[J]. Journal of China University of Petroleum, 2018,42(1):73-81. |
| [11] | 刘晓强, 曲占庆, 郭天魁 , 等. 径向井辅助水力压裂引导裂缝扩展数值模拟[J]. 特种油气藏, 2018,25(5):156-162. |
| [11] | LIU X Q, QU Z Q, GUO T K , et al. Numerical simulation of fracture propagation oriented by radial well assisted hydraulic fracturing[J]. Special Oil and Gas Reservoirs, 2018,25(5):156-162. |
| [12] | GUO T K, LIU B Y, QU Z Q , et al. Study on initiation mechanisms of hydraulic fracture guided by vertical multi-radial boreholes[J]. Rock Mechanics and Rock Engineering, 2017,50(7):1767-1785. |
| [13] | GUO T K, QU Z Q, GONG D G , et al. Numerical simulation of directional propagation of hydraulic fracture guided by vertical multi-radial boreholes[J]. Journal of Natural Gas Science and Engineering, 2016,35:175-188. |
| [14] | DUARTE C A, HAMZEH O N, LISZKA T J . A generalized finite element method for the simulation of three-dimensional dynamic crack propagation[J]. Computer Methods in Applied Mechanics & Engineering, 2001,190(15-17):2227-2262. |
| [15] | MOES N, DOLBOW J, BELYTSCHKO T . A finite element method for crack growth without remeshing[J]. International Journal for Numerical Methods in Engineering, 1999,46:131-150. |
| [16] | RAJENDRAN S, ZHANG B R . A “FE-Meshfree” QUAD4 element based on partition of unity[J]. Computer Methods in Applied Mechanics & Engineering, 2007,197(1-4):128-147. |
| [17] | YANG Y, CHEN L, TANG X H , et al. Corrigendum to A partition-of-unity based ‘FE-Meshfree’ hexahedral element with continuous nodal stress[J]. Computers and Structures, 2017,178:17-28. |
| [18] | HU M, WANG Y, RUTQVIST J . On continuous and discontinuous approaches for modeling groundwater flow in heterogeneous media using the numerical manifold method: model development and comparison[J]. Advances in Water Resources, 2015,80:17-29. |
| [19] | YANG Y T, TANG X H, ZHENG H . A three-node triangular element with continuous nodal stress[J]. Computers and Structures, 2014,141:46-58. |
| [20] | SUKUMAR N, MOES N, MORAN B , et al. Extended finite element method for three-dimensional crack modelling[J]. International Journal for Numerical Methods in Engineering, 2000,48:1549-1570. |
/
| 〈 |
|
〉 |