水平井聚合物驱注采特征及井组效果影响因素分析

doi:10.13809/j.cnki.cn32-1825/te.2022.05.013

摘要/Abstract

摘要：

针对天然能量开发后直接转聚驱开发油田水平井聚合物驱见效时间和见效规律与高含水期聚合物驱有较大差异的问题,运用生产动态分析,提出了更高效便捷的以油井产液产油、含水及沉没度的变化特征来判别聚合物驱的见效时间点。在确定见效时间的基础上,将油井注聚合物后的生产阶段划分为诱导见效期、主导见效期和后续见效期,并建立了注入孔隙体积与所处阶段的关系。开展了不同注入孔隙体积下注入压力、注入能力、产液产油能力及综合含水的变化特征研究,明确了各阶段现场措施的目的及主要措施内容。并根据已实施聚驱井区的油藏条件和聚驱过程暴露出的突出问题,评价这些因素对聚驱井组开发效果的影响,明确了影响目前聚驱井区开发效果的主要因素。该研究为油田聚驱井组现场的高效管理提供了可靠的依据,并明确了下步转驱井组的目标井区。

关键词: 水平井, 聚合物驱, 动态特征, 影响因素, 井组优选

Abstract:

In order to solve the problems that the effectual time and effective features of polymer flooding in horizontal wells of oilfields developed directly after natural energy development are quite different from those of polymer flooding in high water-cut periods, a more efficient and convenient way to determine the effectual time of polymer flooding is proposed by production dynamic analysis, that is the change features of production capacity, water cut and submergence depth. Based on the effectual time, the production period after polymer injecting is divided into the induced effective period, the dominant effective period and the subsequent effective period, and the relation between the injected pore volume and the stage is established. Then, a study has been conducted to characterize the changes in injection pressure, injection capacity, oil production capacity and integrated water content at different injection pore volumes, and the purpose and main content of the on-site measures at each stage have been clarified. According to the reservoir conditions in the polymer flooding well area and the outstanding problems exposed during the polymer flooding process, the influence of these factors on the development effect of the polymer flooding well group is evaluated and the main factors affecting the development effect of the current polymer flooding well group is clarified. This research provides a reliable basis for the efficient management of the oilfield polymer flooding well group on-site, and clarifies the target well areas of the subsequent conversion well group.

Key words: horizontal well, polymer flooding, dynamic features, influencing factor, well group optimization

中图分类号:

TE358

胡德鹏. 水平井聚合物驱注采特征及井组效果影响因素分析[J]. 油气藏评价与开发, 2022, 12(5): 809-815.

HU Depeng. Injection-production features of polymer flooding for horizontal wells and influencing factors of development effects for well groups[J]. Petroleum Reservoir Evaluation and Development, 2022, 12(5): 809-815.

图/表 13

图1

表1

图2

图3

图4

表2

表3

表4

表5

表6

图5

表7

图6

参考文献 21

[1]	DELAMAIDE E, ZAITOUN A, RENARD G, et al. Pelican Lake Field: First successful application of polymer flooding in a heavy oil reservoir[C]// Paper SPE-165234-MS presented at the SPE Enhanced Oil Recovery Conference, Kuala Lumpur, Malaysia, 2-4 July, 2013.
[2]	STANDNES D C, SKJEVRAK I. Literature review of implemented polymer field projects[J]. Journal of Petroleum Science and Engineering, 2014, 122(10): 761-775. doi: 10.1016/j.petrol.2014.08.024
[3]	AL-AZRI AZRI N S, AL-AJMI W, KAZZAZ A, et al. Polymer injection in heavy oil reservoir under strong bottom water drive[C]// Paper SPE-129177-MS presented at the SPE EOR Conference at Oil & Gas West Asia, Muscat, Oman, 11-13 April, 2010.
[4]	WANG J, DONG M Z. Optimum effective viscosity of polymer solution for improving heavy oil recovery[J]. Journal of Petroleum Science and Engineering, 2009, 67: 155-158. doi: 10.1016/j.petrol.2009.05.007
[5]	GUO Z Q, DONG M Z, CHEN Z X, et al. A fast and effective method to evaluate the polymer flooding potential for heavy oil reservoirs in Western Canada[J]. Journal of Petroleum Science and Engineering, 2013, 112: 335-340. doi: 10.1016/j.petrol.2013.11.023
[6]	ASGHARI K, NAKUTNYY P. Experimental results of polymer flooding of heavy oil reservoirs[C]// Paper PETSOC-2008-189 presented at the Canadian International Petroleum Conference, Calgary, Alberta, Canada, 17-19 June, 2008.
[7]	梁丹, 冯国智, 谢晓庆, 等. 聚合物驱阶段注采动态特征及影响因素分析[J]. 特种油气藏, 2014, 21(5):75-78,155.
	LIANG Dan, FENG Guozhi, XIE Xiaoqing, et al. Analysis on Features and Influencing Factors of Injection-production Performance during Polymer Flooding[J]. Special Oil & Gas Reservoirs, 2014, 21(5): 75-78, 155.
[8]	黄伟. 提液措施对聚驱效果的影响[J]. 西南石油大学学报:自然科学版, 2006, 28(3):74-76.
	HUANG Wei. Effect of liquid extraction on polymer flooding[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2006, 28(3): 74-76.
[9]	梁丹, 康晓东, 唐恩高, 等. 聚合物驱注聚参数分阶段优化决策方法[J]. 断块油气田, 2018, 25(2):213-217.
	LIANG Dan, KANG Xiaodong, TANG En'gao, et al. Phased optimization method of injection parameters for polymer flooding[J]. Fault-Block Oil & Gas Field, 2018, 25(2): 213-217.
[10]	田鸿照. 水平井注采井网和注采参数优化研究[J]. 石油化工应用, 2016, 35(8):6-9.
	TIAN Hongzhao. Optimization of horizontal injection-production well pattern and parameter[J]. Petrochemical Industry Application, 2016, 35(8): 6-9.
[11]	周丛丛, 崔长玉, 郭松林. 聚合物驱生产井流压特征规律分析及影响因素研究[J]. 特种油气藏, 2019, 26(5):112-117.
	ZHOU Congcong, CUI Changyu, GUO Songlin. Flowing pressure performance analysis and its influencing factors in polymer flooding production well[J]. Special Oil & Gas Reservoirs, 2019, 26(5): 112-117.
[12]	王旭东, 张健, 康晓东, 等. 稠油油藏水平井聚合物驱注入能力影响因素[J]. 断块油气田, 2017, 24(1):87-90.
	WANG Xudong, ZHANG Jian, KANG Xiaodong, et al. Influence factors on horizontal well injectivity of polymer flooding in heavy oil reservoir[J]. Fault-Block Oil & Gas Field, 2017, 24(1): 87-90.
[13]	瞿朝朝, 李彦来, 王立垒, 等. 海上聚合物驱油藏堵塞位置定量表征方法[J]. 断块油气田, 2019, 26(3):360-363.
	QU Zhaozhao, LI Yanlai, WANG Lilei, et al. Quantitative characterization methods of plugging position of offshore polymer flooding reservoir[J]. Fault-Block Oil & Gas Field, 2019, 26(3): 360-363.
[14]	张凤久. 海上稠油油藏早期注聚最佳时机的确定[J]. 中国海上油气, 2018, 30(3):136-138.
	ZHANG Fengjiu. The optimum early polymer injection time for offshore heavy oil reservoir[J]. China Offshore Oil and Gas, 2018, 30(3): 89-94.
[15]	孙焕泉, 曹绪龙, 李宗阳, 等. 基于储层孔喉匹配的非均相复合驱技术研究与矿场实践——以胜坨油田一区沙二段1-3砂组聚合物驱后单元为例[J]. 油气地质与采收率, 2020, 27(5):53-61.
	SUN Huanquan, CAO Xulong, LI Zongyang, et al. Research on heterogeneous combination flooding technology based on matching between system and reservoir pore throat and its field application: A case of post-polymer flooding Es₂1-3 in Sheng1 area, Shengtuo Oilfield[J]. Petroleum Geology and Recovery Efficiency, 2020, 27(5): 53-61.
[16]	屈亚光, 阮迪, 未志杰, 等. 海上S油田聚合物驱注采井网优化[J]. 油气地质与采收率, 2020, 27(2):112-117.
	QU Yaguang, RUAN Di, WEI Zhijie, et al. Optimization of injection-production pattern for polymer flooding in S offshore Oilfield[J]. Petroleum Geology and Recovery Efficiency, 2020, 27(2): 112-117.
[17]	王刚, 刘斌, 张国浩, 等. 海上油田与陆上油田聚驱开发效果对比及影响因素研究[J]. 石油化工应用, 2017, 36(8):15-18.
	WANG Gang, LIU Bin, ZHANG Guohao, et al. Study on the comparison of development effects of polymer flooding in offshore and onshore oilfield and its influencing factors[J]. Petrochemical Industry Application, 2017, 36(8): 15-18.
[18]	徐冰. 纵向非均质储层凝胶调剖剩余油分布特征实验研究[J]. 油气地质与采收率, 2020, 27(6):71-80.
	XU Bing. Experimental study on distribution characteristics of remaining oil in vertical heterogeneous reservoirs by gel profile control[J]. Petroleum Geology and Recovery Efficiency, 2020, 27(6): 71-80.
[19]	李秋言, 岳湘安. 聚合物滞留率对特低渗透非均质油藏调堵效果的影响——以长庆西峰油田某边底水天然能量开发油藏为例[J]. 油气地质与采收率, 2020, 27(3):85-90.
	LI Qiuyan, YUE Xiang'an. Effect of polymer retention on conformance control in ultra-low permeability heterogeneous reservoirs: A case study on reservoir with edge and bottom water produced by natural energy in Changqing Xifeng Oilfield[J]. Petroleum Geology and Recovery Efficiency, 2020, 27(3): 85-90.
[20]	王强, 计秉玉, 聂俊, 等. 聚合物驱油过程中不同粘度比情况下波及系数计算方法[J]. 石油与天然气地质, 2014, 35(4):551-555.
	WANG Qiang, JI Bingyu, NIE Jun, et al. Sweep efficiency calculation method for different viscosity ratio in polymer flooding[J]. Oil & Gas Geology, 2014, 35(4): 551-555.
[21]	王颂夏. 原油黏度对早期聚合物驱效果影响研究[D]. 成都: 西南石油大学, 2012.
	WANG Songxia. Study on the effect of crude oil viscosity on early polymer flooding[D]. Chengdu: Southwest Petroleum University, 2012.

注入阶段	对应的生产阶段	日产油变化特点	综合含水变化特点
诱导见效期注入阶段	诱导见效期	稳中有降	稳中油升
主导见效期注入阶段	上升期	快速大幅上升	先稳中有降,后上升
主导见效期注入阶段	高峰期	相对稳定	先持续上升,至中后期上升速度变缓
后续见效期注入阶段	递减期	先快速下降后缓慢递减	持续上升,后上升速度持续减缓

沉积微相分类	见效时间（d）	聚驱产油倍数（倍）	聚驱增油量（m³）	吨聚增油量（t）	提高采收率（%）
水下分流河道	126	4.74	24 175	119	13.5
前缘席状砂	139	4.33	18 574	93	10.1
水下分流河道间	156	3.12	11 553	52	6.7

黏度 (mPa·s)	见效时间（d）	含水95 %时注入PV数	聚驱增油量（m³）	吨聚增油量（t）	聚驱提高采收率（%）
<50	35	0.57	23 961	103	12.7
50~150	75	0.59	25 357	125	14.6
150~500	93	0.55	22 967	107	12.4
500~1 000	113	0.51	19 968	97	11.1
1 000~2 000	155	0.43	14 172	75	8.9
2 000~3 000	208	0.36	10 208	53	7.1
3 000~5 000	264	0.29	8 068	41	5.9
5 000~10 000	593	0.23	6 068	32	4.4

分类	累计注入天数（d）	累计注入量（m³）	累计注入孔隙体积（PV）	平均日注入量（m³）	平均注入压力（MPa）	平均注入质量浓度 (mg/L)
古隆起附近注入井	973	34 448	0.096	35.4	9.0	922
小层平均	1 134	93 487	0.286	82.5	5.3	1 104
差值	-161	-59 039	-0.190	-47.1	3.7	-182

分类	高峰期持续生产天数（d）	高峰期平均日产油量（m³）	高峰期累产油量（m³）
聚驱后投产油井	235	16.5	3 877.5
正常投产井	462	18.2	8 408.4