油气藏评价与开发 ›› 2023, Vol. 13 ›› Issue (4): 433-440.doi: 10.13809/j.cnki.cn32-1825/te.2023.04.004

• 煤层气 • 上一篇    下一篇

基于灰色关联方法的深层煤层气井压后产能影响地质工程因素评价

孔祥伟1,2(),谢昕3,王存武3,时贤4   

  1. 1.长江大学石油工程学院,湖北 武汉 430100
    2.油气钻采工程湖北省重点实验室(长江大学),湖北 武汉 430100
    3.中海油研究总院有限责任公司,北京 100028
    4.中国石油大学(华东)石油工程学院,山东 青岛 266580
  • 收稿日期:2023-04-10 出版日期:2023-08-26 发布日期:2023-09-01
  • 作者简介:孔祥伟(1982—),男,博士后,副教授,现从事油气井力学与工作液、储层改造等相关井筒力学研究。地址:湖北省武汉市蔡甸区大学路特1号,邮政编码:430100。E-mail:501074@yangtzeu.edu.cn
  • 基金资助:
    中海油“十四五”规划重大项目“差异化大型压裂物模实验及可压性研究”(CCL2022RCPS0471RSN);“柿庄区块煤层气水平井高效压裂优化研究及应用”(CCL2022RCPS0038ESN)

Evaluation of geological engineering factors for productivity of deep CBM well after fracturing based on grey correlation method

KONG Xiangwei1,2(),XIE Xin3,WANG Cunwu3,SHI Xian4   

  1. 1. School of Petroleum Engineering, Yangtze University, Wuhan, Hubei 430100, China
    2. Key Laboratory of Drilling and Production Engineering for Oil and Gas, Hubei Province(Yangtze University), Wuhan, Hubei 430100, China
    3. CNOOC Research Institute Co., Ltd., Beijing 100028, China
    4. School of Petroleum Engineering, China University of Petroleum(East China), Qingdao, Shandong 266580, China
  • Received:2023-04-10 Online:2023-08-26 Published:2023-09-01

摘要:

煤储层具有低孔、低渗和低压特征,实现煤层气工业开采主要依靠水力压裂等技术。沁水盆地柿庄区块目前日产量小于500 m3的气井占到50 %以上,气井改造后增产效果不理想,气井产能主控影响因素不清楚,直接影响气井整体产能的提升。基于煤层气井压裂及产能数据,利用灰色关联方法刻画了煤层气地质工程因素对压裂产能的影响程度,分析了气井压裂后产能主控影响因素。根据皮尔逊相关性分析方法,建立产能主控因素与气井产量的关联数学模型来预测气井产能,结合气井生产数据验证了预测模型可靠性。采用卡方自动交互检测决策树方法,建立了已压裂井地质和工程因素对气井产能影响关系分类决策树,高含气量条件下工程因素对气井产能提升影响较小,随着含气量降低,不同工程因素对气井产能的影响程度逐渐增大,有助于优化排量、砂量及总液量等主要设计参数,丰富了煤层气压裂后产能评价方法。

关键词: 煤层气, 灰色关联方法, 压裂效果, K-均值聚类算法, 多参数模型

Abstract:

Coal-bed methane reservoirs are characterized by low porosity, low permeability and low pressure, making their industrial exploitation primarily reliant on techniques like hydraulic fracturing. Currently, more than 50 percent of the gas wells in the Shizhuang block in the Qinshui Basin currently produce less than 500 m3/d of coal bed methane. However, the increase in production after gas well retrofitting has not been ideal and the main factors affecting gas well productivity remain unclear, directly impacting the overall improvement. To address this, the degree of influence of geological and engineering factors on fracturing productivity in coal-bed gas wells is described using the gray correlation method, and the main factors controlling gas well productivity after fracturing are analyzed. A correlation mathematical model between the main control factors and gas well production is established using the Pearson correlation analysis method to predict gas well productivity. The reliability of the prediction model is verified through gas well data validation. Furthermore, a classification decision tree is established using the chi-square automatic interactive detection decision tree method, in conjunction with gas well productivity data, to understand the impact of geological and engineering factors on gas well productivity in fractured wells. Under high gas content conditions, engineering factors have a relatively small impact on the productivity improvement of gas wells. However, as the gas content decreases, the impact of different engineering factors on the gas well productivity gradually increases, which helps optimize the main design parameters such as displacement, sand volume, and total liquid volume, enriching the evaluation methods for post fracturing productivity of coal seam pressure.

Key words: coal-bed methane, grey correlation method, fracturing effect, K-means clustering algorithm, optimization of fracturing parameters

中图分类号: 

  • TE328