﻿

• 油气藏评价 •

### 双层油藏垂直井套管外窜流试井解释模型

1. 1. 西安石油大学西部低渗—特低渗油藏开发与治理教育部工程研究中心,陕西 西安 710065;
2. 中国石油大学（北京）石油工程学院,北京 昌平 102249
• 收稿日期:2017-07-21 出版日期:2018-08-26 发布日期:2018-11-28
• 作者简介:苏泽中（1990—）,男,硕士,油气藏监测与管理。
• 基金资助:
陕西省国际科技合作与交流计划项目“陕西省油气资源开发地下水环保技术和立法研究”(2015KW-029);西安石油大学研究生创新与实践能力培养项目“利用动态资料研究缝洞型油藏井间连通性—以塔河油田某区块为例”(YCS16211005)

### Well test interpretation model about interporosity flow outside casing around vertical well in dual layer reservoir

Su Zezhong1,Li Xiaona1,Li Mengmeng2,Liu Rui1,Lin Jiaen1

1. 1.MOE Engineering Research Center of Development & Management of Western Low & Ultra-low Permeability Oilfield, Xi'an Shiyou University, Xi'an, Shaanxi 710065, China
2. College of Petroleum Engineering of China University of Petroleum（Beijing）, Changping, Beijing 102249, China
• Received:2017-07-21 Online:2018-08-26 Published:2018-11-28

Abstract:

In order to monitor and prevent the channeling outside the casing, we established a well-testing interpretive mathematical model of the vertical wells in dual layer reservoir considering the semi-permeability of the interlaminar and the bore hole storage effect. Then we solved and drew the typical well test curves by the Laplace transformation. According to the test curves, there are four flow sections: intermediate flow period, transition section, interporosity flow section and systematic radial flow period. By the analysis of the influence factors of the type curve, we conclude that: ①Well testing curves are influenced by many parameters, for example, the well storage coefficient affects the early curves, while the skin factors, permeability, fluid viscosity, oil layer thickness, and cross flow coefficient affect its transition stage and interporosity flow stage. ②The parameters of the test layer and neighbor layer have an opposite effect on the well test curves. ③The main controlling factors of the strength of the interporosity flow outside the casing include the interporosity flow coefficient, the permeability of neighbor layer and the skin factors of test layer. ④The reason of the interporosity flow outside the casing is the damage degree of the cement sheath outside the casing, and the corresponding monitoring method is put forward.

• TE353