Petroleum Reservoir Evaluation and Development ›› 2024, Vol. 14 ›› Issue (6): 864-871.doi: 10.13809/j.cnki.cn32-1825/te.2024.06.006

• Geothermal Energy Development and Utilization • Previous Articles     Next Articles

Analysis of heat exchange performance and optimization of inner pipe design in geothermal wells reconstructed from depleted oil and gas wells

JIN Guang1,2(), TENG Hongquan1,2, GUO Hong1,2, XIA Qing3, SHEN Zhenkun4, LIU Qiang4, LI Shuangtao4, NIU Jianbo4, CAI Wanlong3()   

  1. 1. Shaanxi Hygrogeology Engineering Environment, Shaanxi Institute of Geological Survey, Xi’an, Shaanxi 710068, China
    2. Shaanxi Engineering Technology Research Center for Urban Geology and Underground Space, Xi’an, Shaanxi 710068, China
    3. School of Human Settlements and Civil Engineering, Xi’an Jiaotong University, Xi’an, Shaanxi 710049, China
    4. No. 5 Oil Production Company of PetroChina Changqing Oilfield Company, Xi’an, Shaanxi 710000, China
  • Received:2024-04-10 Online:2024-12-10 Published:2024-12-26
  • Contact: CAI Wanlong E-mail:303198096@qq.com;wanlongcai@mail.xjtu.edu.cn

Abstract:

Drilling medium-deep geothermal wells is costly, but converting existing depleted oil and gas wells into geothermal wells can significantly reduce these costs. This study analyzed heat extraction performance based on the engineering parameters and test data of a geothermal well reconstructed from a depleted oil and gas well in the northern Shaanxi region. Long-term heat extraction performance was simulated numerically to explore the impact of inner pipe design parameters. The study found that improving the thermal insulation of the inner pipe had a more significant impact on geothermal well heat extraction power as depth increased and flow rate decreased. However, the diameter of the inner pipe had a minimal influence on heat extraction performance and was less sensitive to changes in depth and flow rate, resulting in a limited overall impact. Additionally, the study quantified the effect of inner pipe material selection on the system's economic performance throughout its life cycle. Results indicated that reducing the inner pipe's thermal conductivity from 0.2 W/(m·K) to 0.02 W/(m·K) under certain working conditions could increase the outlet water temperature by 0.66 °C during one heating season. However, it also raised the average heating cost by 0.035 RMB/(kW·h) and extended the payback period by 1.83 a. Therefore, considering the limited benefits of using high-insulation inner pipe materials, it is recommended to prioritize temperature and pressure resistance when designing inner pipes for geothermal wells reconstructed from depleted oil and gas wells.

Key words: depleted oil and gas wells, geothermal extraction, inner pipe material, heat extraction performance, life cycle analysis

CLC Number: 

  • TU833