Reservoir Evaluation and Development ›› 2019, Vol. 9 ›› Issue (3): 62-65.

• Technology • Previous Articles     Next Articles

CO2 flooding characteristics and hydrodynamic suppression channeling method in low permeability heterogeneous reservoirs

Zhao Qingmin1,2,Lun Zengmin1,2,Zhao Shuxia1,2   

  1. 1. Key laboratory of Marine oil and gas reservoir development, SINOPEC, Beijing 100083, China
    2. Petroleum Exploration and Development Research Institute, SINOPEC, Beijing 100083, China
  • Received:2018-12-19 Online:2019-06-26 Published:2019-07-02

Abstract:

CO2 injection is a commonly used technique for recovering oil from mature reservoirs as it can not only greatly improve oil recovery, but also achieve the goal of greenhouse gas emission reduction. Most of the reservoirs in China are continental deposits, and the serious heterogeneity leads to serious CO2 gas channeling, which makes the effect of CO2 flooding worse. In this paper, the simulation experiment of continuous gas injection, WAG, intermittent gas injection and pulse injection of CO2 is carried out by using the heterogeneous model in the layer, and the effects of the characteristics of the CO2 flooding in the heterogeneous oil reservoir and the dynamic environment on the CO2 gas blow-by are studied. The experimental results show that WAG injection flooding is the best, the effect of intermittent gas injection and continuous gas injection is second, and the pulse gas injection effect is the worst; CO2 flooding has no gas and low gas oil. In the production stage, extending the production time of the two stages can improve the development effect; by changing the hydrodynamic conditions, the CO2 gas channeling can be effectively suppressed, and the WAG injection is more capable of suppressing the gas channeling, and the disturbance effect of the pulse gas injection is intensified. The above experimental results show that WAG injection in heterogeneous reservoirs is the optimal injection mode for CO2 flooding.

Key words: CO2 channeling, heterogeneous reservoir, hydrodynamic method, WAG, intermittent injection, pulse gas injection

CLC Number: 

  • TE357