Please wait a minute...
IMAGE/TABLE DETAILS
Application of discrete fracture network modeling technology in mudstone fractured reservoir in Daqing oil region
Wei Xu,Zhang Yongping,Bo Yunhe,Guo Hao,Guo Yuhang,Wu Senhao
Reservoir Evaluation and Development    2018, 8 (4): 11-16.   DOI:
Abstract   (257 HTML3 PDF(pc) (3537KB)(77)  

:The mudstone fractured oil and gas reservoir is a kind of special unconventional reservoirs and its hydrocarbon mainly exists in fractures. This kind of reservoirs has industrial exploitation value due to the large reserves, but the complex geological condition leads to its poor develop effects. In order to reconstruct the geological condition and analyze the production capacity of the mudstone fractured oil and gas reservoir before fracturing, the core characteristics, downhole microseismic and dynamic information of production are fully considered. According to the characteristics and production of the development layer with mudstone fractures in Daqing area, and combined with the seismic and other structural research results, we established the fracture network model, which was constrained by the crack strength attribute. Based on the network model, the coupling model of the artificial fracture and natural fracture is established, so that to analyze the effect before and after fracturing. The results show that the fractured model can accurately describe the numbers and direction of the natural fractures, and estimate the oil and gas production before and after fracturing. The study is used as a method for evaluating the productivity of mudstone fractured oil and gas reservoirs in area A of Daqing, and to provide the basis for the fracturing construction of other wells in this zone.


Fig. 6 Productivity caculated curves before and after fracturing of well HA14
Extracts from the Article
HA14井射孔后试油平均产能为0.43 t/d,利用前面建立的三维裂缝模型采用油藏数值模拟方法进行产量计算得到的日产油为0.45 t/d(图6a),获得地层的有效渗透率为0.3×10-3μm2,预测结果与实际结果相差很小,再一次验证了模型的准确性。
HA14井为一类储层井,在三维裂缝模型中实现天然裂缝与人工裂缝的耦合,通过数值模拟计算得到HA14井压后理论产量为4.1 t/d,理论增产效果明显(图6b)。对于一类储层可通过这种方法模拟计算,从而对单井压裂设计进行优化。
Other Images/Table from this Article