泌238断块凝胶与聚合物多轮次交替注入参数优化研究

doi:10.13809/j.cnki.cn32-1825/te.2021.06.012

Abstract

Abstract:

In order to improve the current situation of serious water channeling and the poor development effect during the water flooding development of B238 Block in Xiaermen Oilfield, and further to enhance the oil recovery efficiency, the numerical simulation method has been carried out to systematically study the parameters optimization of the multi-stage slug injection system after polymer flooding and the differential adjustment of polymer injection concentration based on laboratory experiments. It is found that the combined small slug with multiple rounds is more effective than the large slug with less rounds. The main slug which increases EOR most is composed of 0.08 PV (polymer)+0.02 PV(gel)+0.06 PV(polymer)+0.02 PV(gel)+0.06 PV(polymer)+0.02 PV(gel)+0.06 PV(polymer)+0.02 PV(gel)+0.06 PV(polymer) and the EOR value is 7.92 %. When the polymer concentration adjustment range of injection wells is 20 %, that is, the concentration is adjusted to 420 mg/L, EOR reaches the inflection point. And with the continuous increase of polymer concentration adjustment range, the increase of oil recovery shows a downward trend. It shows that the gel system and polymer alternating injection method have the potential to further develop remaining oil, and provide some technical reference for the development of similar reservoirs.

Key words: numerical simulation, injection parameters optimization, concentration differentiation adjustment, recovery ratio, B238 Block

CLC Number:

TE357

SHEN Naimin,ZHANG Lianfeng,LI Junjie,LU Jun,LONG Weijiang,HU Shukui. Optimization of alternating injection with multiple rounds of gel and polymer in B238 Block[J].Petroleum Reservoir Evaluation and Development, 2021, 11(6): 878-883.

Figures/Tables 7

Fig. 1

Fig. 2

Fig. 3

Table 1

Fig. 4

Fig. 5

Fig. 6

References 20

[1]	丁保东, 张贵才, 葛际江, 等. 普通稠油化学驱的研究进展[J]. 西安石油大学学报(自然科学版), 2011, 26(3):52-58.
	DING Baodong, ZHANG Guicai, GE Jijiang, et al. Research progress in the chemical flooding of conventional heavy oil[J]. Journal of Xi'an Shiyou University(Natural Science Edition), 2011, 26(3):52-58.
[2]	郭文敏, 刘同敬, 秦积舜, 等. 大庆油田聚合物驱后周期分质注聚合物技术[J]. 石油学报, 2010, 31(3):449-451.
	GUO Wenmin, LIU Tongjing, QIN Jishun, et al. Cyclic injection technology of different polymer after polymer flooding in Daqing Oilfield[J]. Acta Petrolei Sinica, 2010, 31(3):449-451.
[3]	裴海华, 张贵才, 葛际江, 等. 化学驱提高普通稠油采收率的研究进展[J]. 油田化学, 2010, 27(3):350-356.
	PEI Haihua, ZHANG Guicai, GE Jijiang, et al. Advance in enhanced ordinary heavy oil recovery by chemical flooding[J]. Oilfield chemistry, 2010, 27(3):350-356.
[4]	巩同宇, 刘军, 江汇, 等. 交联聚合物调驱技术研究及矿场应用[J]. 精细石油化工进展, 2011, 12(11):1-4.
	GONG Tongyu, LIU Jun, JIANG Hui, et al. Study and field application of crosslinked polymer profile-control flooding technology[J]. Advances in fine petrochemicals, 2011, 12(11):1-4.
[5]	张宏. 普通稠油弱凝胶调驱动态调控技术研究[J]. 特种油气藏, 2018, 25(1):125-128.
	ZHANG Hong. Study on dynamic regulation and control of weak gelflooding in ordinary heavy oil[J]. Special Oil and Gas Reservoirs, 2018, 25(1):125-128.
[6]	蒋平, 葛际江, 张贵才, 等. 稠油油藏化学驱采收率的影响因素[J]. 中国石油大学学报(自然科学版), 2011, 35(2):166-171.
	JIANG Ping, Ge Jijiang, ZHANG Guicai, et al. Influence factor on oil recovery efficiency for chemical flooding of heavy oil reservoir[J]. Journal of China University of Petroleum(Edition of Natural Science), 2011, 35(2):166-171.
[7]	方文超. 陆上稠油油田多轮次聚合物驱提高采收率方法[J]. 断块油气田, 2015, 22(5):619-622
	FANG Wenchao. Enhancing oil recovery by multi-cycle polymer flooding for onshore heavy oilfields[J]. Fault-Block Oil & Gas Field, 2015, 22(5):619-622
[8]	刘东, 胡廷惠, 潘广明, 等. 稠油油藏弱凝胶调驱增油预测模型研究[J]. 特种油气藏, 2018, 25(4):103-108.
	LIU Dong, HU Tinghui, PAN Guangming, et al. Forecasting model for profile control and EOR in heavy oil reservoirs by using weak gel[J]. Special Oil and Gas Reservoirs, 2018, 25(4):103-108.
[9]	刘露, 李华斌. 渗透率变异系数对聚合物驱油影响的数值模拟研究[J]. 油田化学, 2011, 28(4):414-418.
	LIU Lu, LI Huabin. Numerical simulation of the permeability variation coefficient effect on polymer flooding[J]. Oilfield Chemistry, 2011, 28(4):414-418.
[10]	未志杰, 康晓东, 何春百, 等. 海上稠油聚合物驱交替注入参数优化研究[J]. 特种油气藏, 2018, 25(1):78-84.
	WEI Zhijie, KANG Xiaodong, HE Chunbai, et al. Alternating injection parameter optimization of polymer flooding in offshore heavy-oil reservoir[J]. Special Oil and Gas Reservoirs, 2018, 25(1):78-84.
[11]	GILBERT L, LOISEL V, SAVARY G, et al. Stretching properties of xanthan, carob, modified guar and celluloses in cosmetic emulsions[J]. Carbohydrate Polymers, 2013, 93(2):644-650. doi: 10.1016/j.carbpol.2012.12.028
[12]	HIREMATH J N, VISHALAKSHI B. Evaluation of a pH-responsive guar gum-based hydrogel as adsorbent for cationic dyes: Kinetic and modelling study[J]. Polymer Bulletin, 2015, 72(12):3063-3081. doi: 10.1007/s00289-015-1453-x
[13]	RISICA D, BARBETTA A, VISCHETTI L, et al. Rheological properties of guar and its methyl, hydroxypropyl and hydroxypropyl-methyl derivatives in semidilute and concentrated aqueous solutions[J]. Polymer, 2010, 51(9):1972-1982. doi: 10.1016/j.polymer.2010.02.041
[14]	梁丹, 康晓东, 唐恩高, 等. 聚合物驱注聚参数分阶段优化决策方法[J]. 断块油气田, 2018, 25(2):213-217.
	LIANG Dan, KANG Xiaodong, TANG Engao, et al. Phased optimization method of injection parameters for polymer flooding[J]. Fault-Block Oil & Gas Field, 2018, 25(2):213-217.
[15]	侯健, 杜庆军, 束青林, 等. 聚合物驱宏观剩余油受效机制及分布规律[J]. 石油学报, 2010, 31(1):96-99.
	HOU Jian, DU Qingjun, SHU Qinglin, et al. Macroscopic response mechanism and distribution rules of remaining oil in polymer flooding[J]. Acta Petrolei Sinica, 2010, 31(1):96-99.
[16]	江汇. 胜坨油田高温油藏深部调剖体系研究及矿场应用[J]. 精细石油化工进展, 2012, 13(11):12-16.
	JIANG Hui. Study and field application of deep profile control system for high temperature reservoir in Shengtuo oilfield[J]. Advances in Fine Petrochemicals, 2012, 13(11):12-16.
[17]	SUBBU C, RAJENDRAN S, KESAVAN K, et al. The physical and electrochemical properties of poly(vinylidene chloride-co-acrylonitrile)-based polymer electrolytes prepared with different plasticizers[J]. Ionics, 2016, 22(2):229-240. doi: 10.1007/s11581-015-1535-7
[18]	KESAVAN K, RAJENDRAN S, MATHEW C M. Studies on poly(vinyl pyrrolidone) based solid polymer blend electrolytes complexed with various lithium salts[J]. Polymer Science Series, 2014, 56(4):520-529.
[19]	王楠, 刘春杰, 于晴晴. 埕岛油田深部调剖体系研究及适应性评价[J]. 石油天然气学报, 2011, 33(8):147-150.
	WANG Nan, LIU Chunjie, YU Qingqing. Study on indepth profile control and evaluation on adaptability of Chengdao Oilfield[J]. Journal of Oil and Gas Technology, 2011, 33(8):147-150.
[20]	张洪, 郑继龙, 宋志学, 等. 弱凝胶深部调剖剂的研制及性能评价[J]. 精细石油化工进展, 2014, 15(1):25-28.
	ZHANG Hong, ZHENG Jilong, SONG Zhixue, et al. Development and evaluation of weak gel used as deep profile control agent[J]. Advances in Fine Petrochemicals, 2014, 15(1):25-28.

Optimization of alternating injection with multiple rounds of gel and polymer in B238 Block

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 7

References 20

Related Articles 15

Metrics

Comments

Recommended 10

方案	前置段塞（PV）	主体段塞（PV）	后置段塞（PV）
0	0.06	0.48（P）	0.06
1	0.06	0.14（P）+0.03（交）+0.14（P）+0.03（交）+0.14（P）	0.06
2	0.06	0.1（P）+0.07（交）+0.14（P）+0.07（交）+0.1（P）	0.06
3	0.06	0.2（P）+0.08（交）+0.2（P）	0.06
4	0.06	0.1（P）+0.03（交）+0.1（P）+0.02（交）+0.1（P）+0.03（交）+0.1（P）	0.06
5	0.06	0.08（P）+0.02（交）+0.06（P）+0.02（交）+0.06（P）+0.02（交）+0.06（P）+0.02（交）+0.06（P）+0.02（交）+0.06（P）	0.06

[1]	CUI Yudong, LU Cheng, GUAN Ziyue, LUO Wanjing, TENG Bailu, MENG Fanpu, PENG Yue. Effects of creep on depressurization-induced gas well productivity in South China Sea natural gas hydrate reservoirs [J]. Petroleum Reservoir Evaluation and Development, 2023, 13(6): 809-818.
[2]	HE Haiyan, LIU Xianshan, GENG Shaoyang, SUN Junchang, SUN Yanchun, JIA Qian. Numerical simulation of UGS facilities rebuilt from oil reservoirs based on the coupling of seepage and temperature fields [J]. Petroleum Reservoir Evaluation and Development, 2023, 13(6): 819-826.
[3]	LIANG Yunpei, ZHANG Huaijun, WANG Lichun, QIN Chaozhong, TIAN Jian, CHEN Qiang, SHI Bowen. Numerical simulation of flow fields and permeability evolution in real fractures under continuous loading stress [J]. Petroleum Reservoir Evaluation and Development, 2023, 13(6): 834-843.
[4]	LIU Honglin,ZHOU Shangwen,LI Xiaobo. Application of PCA plus OPLS method in rapid reserve production rate prediction of shale gas wells [J]. Petroleum Reservoir Evaluation and Development, 2023, 13(4): 474-483.
[5]	YANG Bing, FU Qiang, GUAN Jingtao, LI Linxiang, PAN Haoyu, SONG Hongbin, QIN Tingting, ZHU Zhiwei. Oil displacement efficiency based on different well pattern adjustment simulation in high water cut reservoirs [J]. Petroleum Reservoir Evaluation and Development, 2023, 13(4): 519-524.
[6]	CHEN Xiulin, WANG Xiuyu, XU Changmin, ZHANG Cong. CO₂ sequestration morphology and distribution characteristics based on NMR technology and microscopic numerical simulation [J]. Petroleum Reservoir Evaluation and Development, 2023, 13(3): 296-304.
[7]	HOU Mengru,LIANG Bing,SUN Weiji,LIU Qi,ZHAO Hang. Influence of mineral interface stiffness on fracture propagation law of shale hydraulic fracturing [J]. Reservoir Evaluation and Development, 2023, 13(1): 100-107.
[8]	LIU Yexuan,LIU Xiangjun,DING Yi,ZHOU Xin,LIANG Lixi. Evaluation method of fracability of shale oil reservoir considering influence of interlayer [J]. Reservoir Evaluation and Development, 2023, 13(1): 74-82.
[9]	HE Feng,FENG Qiang,CUI Yushi. Production schedule optimization of gas wells in W shale gas reservoir under controlled pressure difference based on numerical simulation [J]. Reservoir Evaluation and Development, 2023, 13(1): 91-99.
[10]	CHEN Shaoying,WANG Wei,YANG Qingchun,ZHANG Lisong. Sequential coupling thermal-hydro-mechanical model for multiple cluster of fracturing network fracturing in dry hot rock reservoir [J]. Petroleum Reservoir Evaluation and Development, 2022, 12(6): 869-876.
[11]	ZHOU Haiyan,ZHANG Yunlai,LIANG Xiao,ZHANG Jilei,XU Yanan,LIU Jizhu. Liquid production splitting of multi-layer mining considering multiple factors [J]. Petroleum Reservoir Evaluation and Development, 2022, 12(6): 945-950.
[12]	CUI Chuanzhi,YAN Dawei,YAO Tongyu,WANG Jian,ZHANG Chuanbao,WU Zhongwei. Prediction method of migration law and gas channeling time of CO₂ flooding front: A case study of G89-1 Block in Shengli Oilfield [J]. Petroleum Reservoir Evaluation and Development, 2022, 12(5): 741-747.
[13]	LIAO Songlin,XIA Yang,CUI Yinan,LIU Fangzhi,CAO Shengjiang,TANG Yong. Variation of crude oil properties with multi-cycle CO₂ huff-n-puff of horizontal wells in ultra-low permeability reservoir [J]. Petroleum Reservoir Evaluation and Development, 2022, 12(5): 784-793.
[14]	ZHOU Xin,LIU Xiangjun,DING Yi,LIANG Lixi,LIU Yexuan. Simulation of intersecting hydraulic fractures with natural fractures considering layer barrier effect [J]. Petroleum Reservoir Evaluation and Development, 2022, 12(3): 515-525.
[15]	LIU Xueli,ZHENG Xiaojie,DOU Lian,XIE Shuang,PENG Xiaolong,ZHU Suyang. High precision numerical simulation of thin sandstone reservoir with sufficient bottom water and multiple cyclothem: A case study on lower formation of 9th block of Tahe Oilfield [J]. Reservoir Evaluation and Development, 2022, 12(2): 391-398.