高含水高温油藏W/O型乳化剂OB-2性能评价及驱油研究

Abstract

Abstract: Aim

ed at how to develop high temperature reservoir after water flooding, we proposed the in-situ emulsion flooding by injecting surfactant solutions to evaluate the emulsifying property and study on the oil displacement by the emulsion of the OB-2 system for the W/O（water in oil）emulsifier. The results showed that the emulsion viscosity firstly increased and then decreased along with emulsifier concentration. For oil in reservoir-X, the optimal emulsifier concentration was 0.3 wt% at which could make the interfacial tension reduce to 10 ^-2 mN/m order of magnitude. When the water-oil ratio was lower than 7∶3, the complete emulsification of oil-water happened and the W/O emulsion with high viscosity would form. The maximum emulsion viscosity appearde when the oil-water ratio was 7∶3, with the viscosity increasing rate of as high as 370 %. The results of emulsion flooding indicated that the recovery factor of the homogeneous core could increase another 26.15 % after water flooding by injecting 0.3PV OB-2 system. On the other hand, when the permeability ratio of parallel cores was lower than 7.6, applying the OB-2 system could achieve good mobility control and heterogeneity regulation.

Key words: high temperature, high water cut, W/O emulsifier, in-situ emulsion flooding, heterogeneous regulation

CLC Number:

TE39

Pu Wanfen,Mei Zilai,Yang Yang,Wang Duo,Shen Chao,Chen Pei. Evaluation of OB-2 system for W/O emulsifier and displacement experiments research at high temperature reservoir in high water cut period[J].Reservoir Evaluation and Development, 2019, 9(1): 38-43.

Figures/Tables 10

Table 1

Table 2

Fig. 1

Fig. 2

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

Table 3

References 17

[1]	张凤英, 杨光, 刘延彪 , 等. 高温高盐油藏用化学驱油剂的研究[J]. 精细石油化工进展, 2005,6(5):8-12. doi: 10.16640/j.cnki.37-1222/t.2016.19.003
[2]	元福卿, 赵方剑, 夏晞冉 , 等. 胜坨油田二区沙二段3砂组高温高盐油藏低张力氮气泡沫驱单井试验[J]. 油气地质与采收率, 2014,21(1):70-73. doi: 10.3969/j.issn.1009-9603.2014.01.017
[3]	方吉超, 戴彩丽, 由庆 , 等. 塔中402CⅢ高温高盐油藏泡沫驱实验研究[J]. 油气地质与采收率, 2014,21(4):84-88. doi: 10.3969/j.issn.1009-9603.2014.04.020
[4]	赵国柱, 金仁高, 李圣涛 , 等. 高温高盐油藏甜菜碱型表面活性剂TCJ-5的性能及应用[J]. 东北石油大学学报, 2015,39(3):111-117. doi: 10.3969/j.issn.2095-4107.2015.03.014
[5]	任朝华, 张先超, 尤万里 , 等. 乳化剂HC-5的性能及驱油效果[J]. 油田化学, 2015,32(4):554-558.
[6]	Mcauliffe C D . Oil-in-water emulsions and their flow properties in porous media[J]. Journal of Petroleum Technology, 1973,25(6):727-733. doi: 10.2118/4369-PA
[7]	M S Karambeigi, R Abbassi, E Roayaei , et al. Emulsion flooding for enhanced oil recovery: Interactive optimization of phase behavior, microvisual and core-flood experiments[J]. Journal of Industrial and Engineering Chemistry, 2015,29(2):382-391. doi: 10.1016/j.jiec.2015.04.019
[8]	A Mehranfar, M H Ghazanfari . Investigation of the microscopic displacement mechanisms and macroscopic behavior of alkaline flooding at different wettability conditions in shaly glass micromodels[J]. Journal of Petroleum Science and Engineering, 2014,122:595-615. doi: 10.1016/j.petrol.2014.08.027
[9]	L Chen, G Zhang, J Ge , et al. Research of the heavy oil displacement mechanism by using alkaline/surfactant flooding system[J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2013,43(19):63-71. doi: 10.1016/j.colsurfa.2013.05.035
[10]	M Dong, Q Liu, A Li . Displacement mechanisms of enhanced heavy oil recovery by alkaline flooding in a micromodel[J]. Particuology, 2012,10(3):298-305. doi: 10.1016/j.partic.2011.09.008
[11]	宣英龙, 杨雪白, 秦笃国 , 等. 扶余原油乳化生成条件与驱油机理[J]. 油田化学, 2016,33(2):300-304. doi: 10.19346/j.cnki.1000-4092.2016.06.023
[12]	周亚洲, 殷代印, 曹睿 . 高含水后期乳状液的驱油效果与作用机理分析[J]. 油田化学, 2016,33(2):285-290. doi: 10.19346/j.cnki.1000-4092.2016.06.0020
[13]	田茂章, 赵新, 宋新民 , 等. 低渗透油藏中油包水乳液的生成及其扩大波及体积的作用[J]. 应用化工, 2015,44(8):1421-1426.
[14]	任朝华, 罗跃, 陈大钧 . 新型表面活性剂体系降低原油/水的界面张力行为[J]. 油田化学, 2011,28(4):423-426.
[15]	Z. H. Ren, Y. Luo . Dynamic interfacial tension behavior of alkyl amino sulfonate in crude oil-brine system[J]. Tenside Surfactants Detergents, 2013,50(5):369-375. doi: 10.3139/113.110269
[16]	蒲万芬, 唐艳丽, 赵田红 . 驱油用表面活性剂的乳化性能研究[J]. 油气藏评价与开发, 2017,7(4):41-45.
[17]	孙琳, 蒲万芬, 吴雅丽 , 等. 表面活性剂高温乳化性能研究[J]. 油田化学, 2011,28(3):275-279.

岩心编号	直径/cm	长度/cm	孔隙度,%	渗透率/10^-3μm²
1	2.56	6.03	16.12	159
2	2.53	6.66	13.42	76.4

实验编号	级差	岩心类型	孔隙度,%	含油饱和度,%	渗透率/10^-3μm²	采收率,%
实验编号	级差	岩心类型	孔隙度,%	含油饱和度,%	渗透率/10^-3μm²	水驱	总计	提高
1#	2.3	高渗	18.85	66.88	234.6	52.75	78.05	25.3
1#	2.3	低渗	11.44	64.26	102	39.31	56.81	17.5
2#	3.7	高渗	17.41	68.92	418.84	48.14	74.64	26.5
2#	3.7	低渗	12.42	66.24	113.2	18.4	44	25.6
3#	4.2	高渗	18.34	70.23	405.3	52.14	74.78	22.64
3#	4.2	低渗	13.53	66.23	96.5	0	31.2	31.2
4#	5.5	高渗	19.34	69.65	469.15	52.47	76.23	23.76
4#	5.5	低渗	12.65	67.23	85.3	0	15.4	15.4
5#	7.6	高渗	21.38	67.65	592.8	51.85	81.5	29.65
5#	7.6	低渗	12.85	63.52	78	0	0	0
6#	2.08*	高渗	16.12	62.6	159	72.72	81.92	9.2
6#	2.08*	低渗	13.42	61.1	76.4	26.35	44.85	18.5

Evaluation of OB-2 system for W/O emulsifier and displacement experiments research at high temperature reservoir in high water cut period

RichHTML

PDF (PC)

Like

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 10

References 17

Related Articles 12

Metrics

Comments

Recommended 10

[1]	YANG Bing, FU Qiang, GUAN Jingtao, LI Linxiang, PAN Haoyu, SONG Hongbin, QIN Tingting, ZHU Zhiwei. Oil displacement efficiency based on different well pattern adjustment simulation in high water cut reservoirs [J]. Petroleum Reservoir Evaluation and Development, 2023, 13(4): 519-524.
[2]	ZHANG Longsheng,WANG Weiheng. Study and application of a high temperature foaming agent in anionic-nonionic system namely HDHP: A case study of shale gas wells in Dongsheng Block, Sichuan Basin [J]. Reservoir Evaluation and Development, 2023, 13(2): 240-246.
[3]	YAN Jianli,YAN Guanshan,GU Zhimeng,BIE Mengjun,ZHANG Zhenjie. Selection of fracturing wells and layers of Bohai J Oil Field in the late stage of high water cut and its application [J]. Petroleum Reservoir Evaluation and Development, 2021, 11(5): 736-743.
[4]	LIU Gang,WANG Junheng,WANG Danling,YAN Yonghe,JIANG Xuefeng,WANG Qian. Development and reservoir adaptability evaluation of a high temperature resistant plugging agent: tannin extract [J]. Petroleum Reservoir Evaluation and Development, 2021, 11(3): 452-458.
[5]	YANG Jian,ZHAN Guowei,ZHAO Yong,REN Chunyu,QU Chongjiu. Characteristics of supercritical adsorption and desorption of deep shale gas in South Sichuan [J]. Reservoir Evaluation and Development, 2021, 11(2): 184-189.
[6]	PENG Jinlong,LI Quanshuang. Research and application of high temperature low-density elastoplasticity cement slurry [J]. Reservoir Evaluation and Development, 2020, 10(3): 104-108.
[7]	HUANG Shuai,MEI Haiyan. Rapid evaluation of old wells in the 6th sand group of first member of Sanduo Formation in ZW12 fault block under water flooded condition [J]. Reservoir Evaluation and Development, 2019, 9(6): 47-50.
[8]	Zhang Tao,Li Dening,Cui Yinan,Liu Yonghe,Che Zhengjia,Wang Shunli. Optimization and implementation of CO₂ huff and puff parameters of horizontal wells in Banqiao Oilfield during extra high water cut period [J]. Reservoir Evaluation and Development, 2019, 9(3): 51-56.
[9]	Li Ke,Hu Shuyong,Zhang Jinqing,Zhu Guojin,Zhou Wensheng,Geng Yanhong. A new type water flooding characteristic curve and its application [J]. Reservoir Evaluation and Development, 2019, 9(2): 13-16.
[10]	Lei Xiao,Li Shusong,Wang Wenjuan,Zhang Fengbo,He Zhihui,Ma Shuai. Application of a well testing simulation technique in productivity evaluation of well-X1 in high temperature and high pressure reservoir [J]. Reservoir Evaluation and Development, 2019, 9(2): 17-20.
[11]	Chen Jun,Yang Junyi,Liu Qiguo. Study on the speed of oil recovery and influence factors in extra-high water content period [J]. Reservoir Evaluation and Development, 2018, 8(4): 17-21.
[12]	Chen Jianhua,Chu Peng,Wang Laichao,Liu Kai,Ruan Hongjiang. Calculation and application of bottom hole pressure buildup during shut-in period in high temperature and high pressure offshore gas well [J]. Reservoir Evaluation and Development, 2018, 8(2): 41-46.